前ﾚｽ元ﾄﾋﾟ次ﾚｽ Re: 問題ID:28687 最強WEB問題集LinuC/LPIC Lv2 201 (2018/9/19)
-----引用(始)-----

mrしてoldconfigしたいなら事前に.configﾃﾞｰﾀを退避させておく必要があるかと思いますし､それならそもそもcleanしてoldconfigで済むのではと思います｡

-----引用(終)-----

今どきだと.configを退避させなくても稼働中のものから適切なの参照してくれるはずですが…
手元のCentOS7ではこんな感じになりました｡
[code]
$ cat /etc/redhat-release
CentOS Linux release 7.7.1908 (Core)
$ uname -r
3.10.0-1062.4.1.el7.x86_64
$ curl https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.6.11.tar.xz -O
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 106M 100 106M 0 0 34.3M 0 0:00:03 0:00:03 --:--:-- 34.3M
$ tar xJf linux-5.6.11.tar.xz
$ cd linux-5.6.11
$ make oldconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/parser.tab.[ch]
HOSTCC scripts/kconfig/lexer.lex.o
HOSTCC scripts/kconfig/parser.tab.o
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTCC scripts/kconfig/util.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --oldconfig Kconfig
#
# using defaults found in /boot/config-3.10.0-1062.4.1.el7.x86_64
#
/boot/config-3.10.0-1062.4.1.el7.x86_64:692:warning: symbol value 'm' invalid for CPU_FREQ_STAT
/boot/config-3.10.0-1062.4.1.el7.x86_64:936:warning: symbol value 'm' invalid for NF_CT_PROTO_GRE
/boot/config-3.10.0-1062.4.1.el7.x86_64:964:warning: symbol value 'm' invalid for NF_NAT_REDIRECT
/boot/config-3.10.0-1062.4.1.el7.x86_64:967:warning: symbol value 'm' invalid for NF_TABLES_INET
/boot/config-3.10.0-1062.4.1.el7.x86_64:1134:warning: symbol value 'm' invalid for NF_TABLES_IPV4
/boot/config-3.10.0-1062.4.1.el7.x86_64:1138:warning: symbol value 'm' invalid for NF_TABLES_ARP
/boot/config-3.10.0-1062.4.1.el7.x86_64:1179:warning: symbol value 'm' invalid for NF_TABLES_IPV6
/boot/config-3.10.0-1062.4.1.el7.x86_64:1556:warning: symbol value 'm' invalid for NET_DEVLINK
/boot/config-3.10.0-1062.4.1.el7.x86_64:2713:warning: symbol value 'm' invalid for ISDN_CAPI
/boot/config-3.10.0-1062.4.1.el7.x86_64:3658:warning: symbol value 'm' invalid for LIRC
*
* Restart config...
*
*
* General setup
*
Compile also drivers which will not load (COMPILE_TEST) [N/y/?] (NEW)
[/code]

• Re: 問題ID:28687(2018/9/25)
• Re: 問題ID:28687(2018/9/25)
• Re: 問題ID:28687(2020/5/8)
• Re: 問題ID:28687(2020/5/8)
• Re: 問題ID:28687(2020/5/9)
• Re: 問題ID:28687(2020/5/9)
• Re: 問題ID:28687(2020/5/11)
• Re: 問題ID:28687(2020/5/11)
• Re: 問題ID:28687(2020/5/13)

前ﾚｽ元ﾄﾋﾟ次ﾚｽ