ﾚｽ
前ﾚｽ元ﾄﾋﾟ次ﾚｽ
ﾀｲﾄﾙ
Re: ｼｽｺ1841ｼﾘｰｽﾞﾙｰﾀ
ﾌｫｰﾗﾑ
CCNA全般
投稿ﾕｰｻﾞ(投稿日)
(2021/7/6)
本文
☆ｵｰﾄMDI/MDI-Xについて
この世代のﾙｰﾀｰのﾙｰﾃｯﾄﾞﾎﾟｰﾄは正しくﾙｰﾀｰのﾎﾟｰﾄとして振る舞っていました｡
つまり｡ｵｰﾄMDI/MDI-X｢ではない｣です｡

★対処法
ｹｰﾌﾞﾙを｢ｸﾛｽｹｰﾌﾞﾙ｣にしてみてください｡
→ｸﾛｽｹｰﾌﾞﾙがない場合は間にｽｲｯﾁを挟んで｡

◇sh int出力例
ｽﾄﾚｰﾄｹｰﾌﾞﾙの時
#sh int fa 0/1
FastEthernet0/1 is up, line protocol is down
Hardware is Gt96k FE, address is 0015.2b24.644b (bia 0015.2b24.644b)
Internet address is 192.168.3.1/24
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto Speed, 100BaseTX/FX
…
ｸﾛｽｹｰﾌﾞﾙの時
#sh int fa 0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0015.2b24.644b (bia 0015.2b24.644b)
Internet address is 192.168.3.1/24
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
…

ﾚｽ一覧

前ﾚｽ元ﾄﾋﾟ次ﾚｽ

Ping-tﾓﾊﾞｲﾙTOP

Copyright (c) 2010
Ping-t All rights reserved.