ﾚｽ
前ﾚｽ
元ﾄﾋﾟ
次ﾚｽﾀｲﾄﾙ
Re: etherchannelとnative vlan設定ﾌｫｰﾗﾑ
CCNP全般投稿ﾕｰｻﾞ(投稿日)
(2015/1/14)本文
2960の機種を選んでいます｡それぞれsh runのｺﾋﾟｰとﾒｯｾｰｼﾞのｺﾋﾟｰです
sh runをｺﾋﾟｰするために再度設定したら､ﾊﾞﾝﾄﾞﾙ形成に失敗してしまいました｡
ｼﾐｭﾚｰﾀがｺﾏﾝﾄﾞ非対応なんでしょうか｡
SW1
interface FastEthernet0/1
channel-protocol lacp
channel-group 1 mode active
switchport mode trunk
!
interface FastEthernet0/2
channel-protocol lacp
channel-group 1 mode active
switchport mode trunk
interface Port-channel 1
switchport trunk native vlan 99
switchport mode trunk
%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1), with Switch Port-channel 1 (99).
-------------------------------------------------------
SW2
interface FastEthernet0/1
channel-protocol lacp
channel-group 1 mode passive
switchport mode trunk
!
interface FastEthernet0/2
channel-protocol lacp
channel-group 1 mode passive
switchport mode trunk
interface Port-channel 1
switchport trunk native vlan 99
switchport mode trunk
%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on Port-channel 1 (99), with Switch FastEthernet0/1 (1).
%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on Port-channel 1 (99), with Switch FastEthernet0/2 (1).
ﾚｽ一覧
- Re: etherchannelとnative vlan設定(2015/1/14)
- Re: etherchannelとnative vlan設定(2015/1/14)
- Re: etherchannelとnative vlan設定(2015/1/15)
- Re: etherchannelとnative vlan設定(2015/1/16)
- Re: etherchannelとnative vlan設定(2015/1/17)
- Re: etherchannelとnative vlan設定(2015/1/19)
前ﾚｽ元ﾄﾋﾟ次ﾚｽ